lytedev
/
router
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

No radvd

This commit is contained in:
Daniel Flanagan 2022-01-31 16:45:02 -06:00
parent 20f1439af8
commit 63dfe9c488
2 changed files with 0 additions and 125 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
radvd.conf
View File

@ -1,39 +0,0 @@
interface lo
{
AdvSendAdvert on;
MinRtrAdvInterval 3;
MaxRtrAdvInterval 10;
AdvDefaultPreference low;
AdvHomeAgentFlag off;
# prefix 2001:db8:1:0::/64
# {
# AdvOnLink on;
# AdvAutonomous on;
# AdvRouterAddr off;
# };
#prefix 0:0:0:1234::/64
#{
# AdvOnLink on;
# AdvAutonomous on;
# AdvRouterAddr off;
# Base6to4Interface ppp0;
# AdvPreferredLifetime 120;
# AdvValidLifetime 300;
# };
# route 2001:db0:fff::/48
# {
# AdvRoutePreference high;
# AdvRouteLifetime 3600;
# };
# RDNSS 2001:db8::1 2001:db8::2
# {
# AdvRDNSSLifetime 30;
# };
# DNSSL branch.example.com example.com
# {
# AdvDNSSLLifetime 30;
# };
};

86
radvd.conf.bak
View File

@ -1,86 +0,0 @@
interface lo
{
AdvSendAdvert on;
# This may be needed on some interfaces which are not active when
# radvd starts, but become available later on; see man page for details.
# IgnoreIfMissing on;
# These settings cause advertisements to be sent every 3-10 seconds. This
# range is good for 6to4 with a dynamic IPv4 address, but can be greatly
# increased when not using 6to4 prefixes.
MinRtrAdvInterval 3;
MaxRtrAdvInterval 10;
# You can use AdvDefaultPreference setting to advertise the preference of
# the router for the purposes of default router determination.
# NOTE: This feature is still being specified and is not widely supported!
AdvDefaultPreference low;
# Disable Mobile IPv6 support
AdvHomeAgentFlag off;
# example of a standard prefix
# prefix 2001:db8:1:0::/64
# {
# AdvOnLink on;
# AdvAutonomous on;
# AdvRouterAddr off;
# };
# example of a 6to4 prefix
#
# Note that the first 48 bits are specified here as zeros. These will be
# replaced with the appropriate 6to4 address when radvd starts or is
# reconfigured. Be sure that the SLA ID (1234 in this case) is specified
# here!
#prefix 0:0:0:1234::/64
#{
# AdvOnLink on;
# AdvAutonomous on;
# AdvRouterAddr off;
# This setting causes radvd to replace the first 48 bits of the prefix
# with the 6to4 address generated from the specified interface. For example,
# if the address of ppp0 is 192.0.2.25 when radvd configures itself, this
# prefix will be advertised as 2002:C000:0219:1234::/64.
#
# If ppp0 is not available at configuration time, this prefix will not be
# advertised, but other prefixes listed in the configuration will be
# advertised as usual.
#
# When using the Base6to4Interface option, make sure radvd receives a
# SIGHUP every time the ppp0 interface goes up, down, or is assigned a
# new IPv4 address. The SIGHUP will cause radvd to recognize that the
# ppp0 interface has changed and will adjust the advertisements
# accordingly.
# Base6to4Interface ppp0;
# If the IP address of ppp0 is assigned dynamically, be sure to set the
# lifetimes for this prefix to be small. Otherwise, hosts on your network
# may continue to use a prefix that no longer corresponds to the address
# on ppp0!
# AdvPreferredLifetime 120;
# AdvValidLifetime 300;
# };
# example of a more specific route
# NOTE: This feature is not very widely supported! You may also need to
# enable it manually (e.g. on Linux, change the value of
# sysctl accept_ra_rt_info_max_plen to 48 or 64)
# route 2001:db0:fff::/48
# {
# AdvRoutePreference high;
# AdvRouteLifetime 3600;
# };
# RDNSS
# NOTE: This feature is not very widely implemented.
# RDNSS 2001:db8::1 2001:db8::2
# {
# AdvRDNSSLifetime 30;
# };
# DNS Search Lists
DNSSL branch.example.com example.com
{
AdvDNSSLLifetime 30;
};
};