This repository has been archived on 2024-03-28. You can view files and clone it, but cannot push or open issues or pull requests.
dotfiles/common/qutebrowser/qutebrowser.conf

1592 lines
49 KiB
Plaintext
Raw Permalink Normal View History

2017-05-05 01:47:33 -05:00
# vim: ft=dosini
# Configfile for qutebrowser.
#
# This configfile is parsed by python's configparser in extended
# interpolation mode. The format is very INI-like, so there are
# categories like [general] with "key = value"-pairs.
#
# Note that you shouldn't add your own comments, as this file is
# regenerated every time the config is saved.
#
# Interpolation looks like ${value} or ${section:value} and will be
# replaced by the respective value.
#
# Some settings will expand environment variables. Note that, since
# interpolation is run first, you will need to escape the $ char as
# described below.
#
# This is the default config, so if you want to remove anything from
# here (as opposed to change/add), for example a key binding, set it to
# an empty value.
#
# You will need to escape the following values:
# - # at the start of the line (at the first position of the key) (\#)
# - $ in a value ($$)
2017-05-05 01:47:33 -05:00
# General/miscellaneous options.
[general]
2017-05-05 01:47:33 -05:00
# ignore-case (IgnoreCase):
# Whether to find text on a page case-insensitively.
# true: Search case-insensitively
# false: Search case-sensitively
# smart: Search case-sensitively if there are capital chars
# Default: smart
ignore-case = smart
2017-05-05 01:47:33 -05:00
# startpage (List of String):
# The default page(s) to open at the start, separated by commas.
# Default: https://start.duckduckgo.com
2018-10-22 20:05:34 -05:00
startpage = https://start.duckduckgo.com
2017-05-05 01:47:33 -05:00
# yank-ignored-url-parameters (List of String):
# The URL parameters to strip with :yank url, separated by commas.
# Default:
# ref,utm_source,utm_medium,utm_campaign,utm_term,utm_content
yank-ignored-url-parameters = ref,utm_source,utm_medium,utm_campaign,utm_term,utm_content
2017-05-05 01:47:33 -05:00
# default-open-dispatcher (String):
# The default program used to open downloads. Set to an empty string
# to use the default internal handler.
# Any {} in the string will be expanded to the filename, else the
# filename will be appended.
# Default:
default-open-dispatcher =
2017-05-05 01:47:33 -05:00
# default-page (FuzzyUrl):
# The page to open if :open -t/-b/-w is used without URL. Use
# `about:blank` for a blank page.
# Default: ${startpage}
default-page = ${startpage}
2017-05-05 01:47:33 -05:00
# auto-search (AutoSearch):
# Whether to start a search when something else than a URL is
# entered.
# naive: Use simple/naive check.
# dns: Use DNS requests (might be slow!).
# false: Never search automatically.
# Default: naive
auto-search = naive
2017-05-05 01:47:33 -05:00
# auto-save-config (Bool):
# Whether to save the config automatically on quit.
# Valid values: true, false
# Default: true
auto-save-config = true
2017-05-05 01:47:33 -05:00
# auto-save-interval (Int):
# How often (in milliseconds) to auto-save config/cookies/etc.
# Default: 15000
auto-save-interval = 15000
2017-05-05 01:47:33 -05:00
# editor (ShellCommand):
# The editor (and arguments) to use for the `open-editor` command.
# The arguments get split like in a shell, so you can use `"` or `'`
# to quote them.
# `{}` gets replaced by the filename of the file to be edited.
# Default: gvim -f "{}"
editor = nvim -f "{}"
2017-05-05 01:47:33 -05:00
# editor-encoding (Encoding):
# Encoding to use for editor.
# Default: utf-8
editor-encoding = utf-8
2017-05-05 01:47:33 -05:00
# private-browsing (Bool):
# Open new windows in private browsing mode which does not record
# visited pages.
2017-05-05 01:47:33 -05:00
# Valid values: true, false
# Default: false
private-browsing = false
2017-05-05 01:47:33 -05:00
# developer-extras (Bool):
# Enable extra tools for Web developers.
# This needs to be enabled for `:inspector` to work and also adds an
# _Inspect_ entry to the context menu. For QtWebEngine, see
# 'qutebrowser --help' instead.
# Valid values: true, false
# Default: false
developer-extras = true
2017-05-05 01:47:33 -05:00
# print-element-backgrounds (Bool):
# Whether the background color and images are also drawn when the
# page is printed.
# This setting only works with Qt 5.8 or newer when using the
# QtWebEngine backend.
# Valid values: true, false
# Default: true
print-element-backgrounds = true
2017-05-05 01:47:33 -05:00
# xss-auditing (Bool):
# Whether load requests should be monitored for cross-site scripting
# attempts.
# Suspicious scripts will be blocked and reported in the inspector's
# JavaScript console. Enabling this feature might have an impact on
# performance.
# Valid values: true, false
# Default: false
xss-auditing = true
2017-05-05 01:47:33 -05:00
# default-encoding (String):
# Default encoding to use for websites.
# The encoding must be a string describing an encoding such as
# _utf-8_, _iso-8859-1_, etc.
# Default: iso-8859-1
default-encoding = iso-8859-1
2017-05-05 01:47:33 -05:00
# new-instance-open-target (String):
# How to open links in an existing instance if a new one is
# launched.
# tab: Open a new tab in the existing window and activate the
# window.
# tab-bg: Open a new background tab in the existing window and
# activate the window.
# tab-silent: Open a new tab in the existing window without
# activating the window.
# tab-bg-silent: Open a new background tab in the existing
# window without activating the window.
# window: Open in a new window.
# Default: tab
new-instance-open-target = tab
2017-05-05 01:47:33 -05:00
# new-instance-open-target.window (String):
# Which window to choose when opening links as new tabs.
# first-opened: Open new tabs in the first (oldest) opened
# window.
# last-opened: Open new tabs in the last (newest) opened window.
# last-focused: Open new tabs in the most recently focused
# window.
# last-visible: Open new tabs in the most recently visible
# window.
# Default: last-focused
new-instance-open-target.window = last-focused
2017-05-05 01:47:33 -05:00
# log-javascript-console (String):
# How to log javascript console messages.
# none: Don't log messages.
# debug: Log messages with debug level.
# info: Log messages with info level.
# Default: debug
log-javascript-console = debug
2017-05-05 01:47:33 -05:00
# save-session (Bool):
# Whether to always save the open pages.
# Valid values: true, false
# Default: false
save-session = true
2017-05-05 01:47:33 -05:00
# session-default-name (SessionName):
# The name of the session to save by default, or empty for the last
# loaded session.
# Default:
session-default-name =
2017-05-05 01:47:33 -05:00
# url-incdec-segments (FlagList):
# The URL segments where `:navigate increment/decrement` will search
# for a number.
# Valid values: host, path, query, anchor
# Default: path,query
url-incdec-segments = path,query
2017-05-05 01:47:33 -05:00
# General options related to the user interface.
[ui]
# history-session-interval (Int):
# The maximum time in minutes between two history items for them to
# be considered being from the same session. Use -1 to disable
# separation.
# Default: 30
history-session-interval = 30
2017-05-05 01:47:33 -05:00
# zoom-levels (List of Perc):
# The available zoom levels, separated by commas.
# Default:
# 25%,33%,50%,67%,75%,90%,100%,110%,125%,150%,175%,200%,250%,300%,400%,500%
zoom-levels = 25%,33%,50%,67%,75%,90%,100%,110%,125%,150%,175%,200%,250%,300%,400%,500%
2017-05-05 01:47:33 -05:00
# default-zoom (Perc):
# The default zoom level.
# Default: 100%
default-zoom = 100%
2017-05-05 01:47:33 -05:00
# downloads-position (VerticalPosition):
# Where to show the downloaded files.
# Valid values: top, bottom
# Default: top
downloads-position = top
2017-05-05 01:47:33 -05:00
# status-position (VerticalPosition):
# The position of the status bar.
# Valid values: top, bottom
# Default: bottom
status-position = bottom
2017-05-05 01:47:33 -05:00
# message-timeout (Int):
# Time (in ms) to show messages in the statusbar for.
# Set to 0 to never clear messages.
2017-05-05 01:47:33 -05:00
# Default: 2000
message-timeout = 2000
2017-05-05 01:47:33 -05:00
# message-unfocused (Bool):
# Whether to show messages in unfocused windows.
# Valid values: true, false
# Default: false
message-unfocused = false
2017-05-05 01:47:33 -05:00
# confirm-quit (ConfirmQuit):
# Whether to confirm quitting the application.
# always: Always show a confirmation.
# multiple-tabs: Show a confirmation if multiple tabs are
# opened.
# downloads: Show a confirmation if downloads are running
# never: Never show a confirmation.
# Default: never
confirm-quit = never
2017-05-05 01:47:33 -05:00
# zoom-text-only (Bool):
# Whether the zoom factor on a frame applies only to the text or to
# all content.
# Valid values: true, false
# Default: false
zoom-text-only = false
2017-05-05 01:47:33 -05:00
# frame-flattening (Bool):
# Whether to expand each subframe to its contents.
# This will flatten all the frames to become one scrollable page.
# Valid values: true, false
# Default: false
frame-flattening = false
2017-05-05 01:47:33 -05:00
# user-stylesheet (File):
# User stylesheet to use (absolute filename or filename relative to
# the config directory). Will expand environment variables.
# Default:
user-stylesheet =
2017-05-05 01:47:33 -05:00
# hide-scrollbar (Bool):
# Hide the main scrollbar.
# Valid values: true, false
# Default: true
hide-scrollbar = true
2017-05-05 01:47:33 -05:00
# smooth-scrolling (Bool):
# Whether to enable smooth scrolling for web pages. Note smooth
# scrolling does not work with the :scroll-px command.
2017-05-05 01:47:33 -05:00
# Valid values: true, false
# Default: false
smooth-scrolling = true
2017-05-05 01:47:33 -05:00
# remove-finished-downloads (Int):
# Number of milliseconds to wait before removing finished downloads.
# Will not be removed if value is -1.
# Default: -1
remove-finished-downloads = -1
2017-05-05 01:47:33 -05:00
# hide-statusbar (Bool):
# Whether to hide the statusbar unless a message is shown.
# Valid values: true, false
# Default: false
hide-statusbar = true
2017-05-05 01:47:33 -05:00
# statusbar-padding (Padding):
# Padding for statusbar (top, bottom, left, right).
# Default: 1,1,0,0
statusbar-padding = 1,1,0,0
2017-05-05 01:47:33 -05:00
# window-title-format (FormatString):
# The format to use for the window title. The following placeholders
# are defined:
# * `{perc}`: The percentage as a string like `[10%]`.
# * `{perc_raw}`: The raw percentage, e.g. `10`
# * `{title}`: The title of the current web page
# * `{title_sep}`: The string ` - ` if a title is set, empty
# otherwise.
# * `{id}`: The internal window ID of this window.
# * `{scroll_pos}`: The page scroll position.
# * `{host}`: The host of the current web page.
# * `{backend}`: Either 'webkit' or 'webengine'
# * `{private}` : Indicates when private mode is enabled.
2017-05-05 01:47:33 -05:00
# Default: {perc}{title}{title_sep}qutebrowser
window-title-format = {perc}{title}{title_sep}qutebrowser
2017-05-05 01:47:33 -05:00
# modal-js-dialog (Bool):
# Use standard JavaScript modal dialog for alert() and confirm()
# Valid values: true, false
# Default: false
modal-js-dialog = false
2017-05-05 01:47:33 -05:00
# hide-wayland-decoration (Bool):
# Hide the window decoration when using wayland (requires restart)
# Valid values: true, false
# Default: false
hide-wayland-decoration = false
2017-05-05 01:47:33 -05:00
# keyhint-blacklist (List of String):
# Keychains that shouldn't be shown in the keyhint dialog
# Globs are supported, so ';*' will blacklist all keychainsstarting
# with ';'. Use '*' to disable keyhints
# Default:
keyhint-blacklist =
# keyhint-delay (Int):
# Time from pressing a key to seeing the keyhint dialog (ms)
# Default: 500
keyhint-delay = 500
2017-05-05 01:47:33 -05:00
# prompt-radius (Int):
# The rounding radius for the edges of prompts.
# Default: 8
prompt-radius = 8
2017-05-05 01:47:33 -05:00
# prompt-filebrowser (Bool):
# Show a filebrowser in upload/download prompts.
# Valid values: true, false
# Default: true
prompt-filebrowser = true
2017-05-05 01:47:33 -05:00
# Settings related to the network.
[network]
2017-05-05 01:47:33 -05:00
# do-not-track (Bool):
# Value to send in the `DNT` header.
# Valid values: true, false
# Default: true
do-not-track = true
2017-05-05 01:47:33 -05:00
# accept-language (String):
# Value to send in the `accept-language` header.
# Default: en-US,en
accept-language = en-US,en
2017-05-05 01:47:33 -05:00
# referer-header (String):
# Send the Referer header
# always: Always send.
# never: Never send; this is not recommended, as some sites may
# break.
# same-domain: Only send for the same domain. This will still
# protect your privacy, but shouldn't break any sites.
# Default: same-domain
referer-header = same-domain
2017-05-05 01:47:33 -05:00
# user-agent (UserAgent):
# User agent to send. Empty to send the default.
# Default:
user-agent =
2017-05-05 01:47:33 -05:00
# proxy (Proxy):
# The proxy to use.
# In addition to the listed values, you can use a `socks://...` or
# `http://...` URL.
# system: Use the system wide proxy.
# none: Don't use any proxy
# Default: system
proxy = system
2017-05-05 01:47:33 -05:00
# proxy-dns-requests (Bool):
# Whether to send DNS requests over the configured proxy.
# Valid values: true, false
# Default: true
proxy-dns-requests = true
2017-05-05 01:47:33 -05:00
# ssl-strict (BoolAsk):
# Whether to validate SSL handshakes.
# Valid values: true, false, ask
# Default: ask
ssl-strict = ask
2017-05-05 01:47:33 -05:00
# dns-prefetch (Bool):
# Whether to try to pre-fetch DNS entries to speed up browsing.
# Valid values: true, false
# Default: true
dns-prefetch = true
2017-05-05 01:47:33 -05:00
# custom-headers (HeaderDict):
# Set custom headers for qutebrowser HTTP requests.
# Default:
custom-headers =
2017-05-05 01:47:33 -05:00
# netrc-file (File):
# Set location of a netrc-file for HTTP authentication. If empty,
# ~/.netrc is used.
# Default:
netrc-file =
2017-05-05 01:47:33 -05:00
2017-05-05 01:47:33 -05:00
# Options related to completion and command history.
[completion]
2017-05-05 01:47:33 -05:00
# show (String):
# When to show the autocompletion window.
# always: Whenever a completion is available.
# auto: Whenever a completion is requested.
# never: Never.
# Default: always
show = always
2017-05-05 01:47:33 -05:00
# download-path-suggestion (String):
# What to display in the download filename input.
# path: Show only the download path.
# filename: Show only download filename.
# both: Show download path and filename.
# Default: path
download-path-suggestion = path
2017-05-05 01:47:33 -05:00
# timestamp-format (TimestampTemplate):
# How to format timestamps (e.g. for history)
# Default: %Y-%m-%d
timestamp-format = %Y-%m-%d
2017-05-05 01:47:33 -05:00
# height (PercOrInt):
# The height of the completion, in px or as percentage of the
# window.
# Default: 50%
height = 50%
2017-05-05 01:47:33 -05:00
# cmd-history-max-items (Int):
# How many commands to save in the command history.
# 0: no history / -1: unlimited
# Default: 100
cmd-history-max-items = 100
2017-05-05 01:47:33 -05:00
# web-history-max-items (Int):
# How many URLs to show in the web history.
# 0: no history / -1: unlimited
# Default: 1000
web-history-max-items = 1000
2017-05-05 01:47:33 -05:00
# quick-complete (Bool):
# Whether to move on to the next part when there's only one possible
# completion left.
# Valid values: true, false
# Default: true
quick-complete = true
2017-05-05 01:47:33 -05:00
# shrink (Bool):
# Whether to shrink the completion to be smaller than the configured
# size if there are no scrollbars.
# Valid values: true, false
# Default: false
shrink = false
2017-05-05 01:47:33 -05:00
# scrollbar-width (Int):
# Width of the scrollbar in the completion window (in px).
# Default: 12
scrollbar-width = 12
2017-05-05 01:47:33 -05:00
# scrollbar-padding (Int):
# Padding of scrollbar handle in completion window (in px).
# Default: 2
scrollbar-padding = 2
2017-05-05 01:47:33 -05:00
# Options related to input modes.
[input]
2017-05-05 01:47:33 -05:00
# timeout (Int):
# Timeout (in milliseconds) for ambiguous key bindings.
# If the current input forms both a complete match and a partial
# match, the complete match will be executed after this time.
# Default: 500
timeout = 500
2017-05-05 01:47:33 -05:00
# partial-timeout (Int):
# Timeout (in milliseconds) for partially typed key bindings.
# If the current input forms only partial matches, the keystring
# will be cleared after this time.
# Default: 5000
partial-timeout = 5000
2017-05-05 01:47:33 -05:00
# insert-mode-on-plugins (Bool):
# Whether to switch to insert mode when clicking flash and other
# plugins.
# Valid values: true, false
# Default: false
insert-mode-on-plugins = false
2017-05-05 01:47:33 -05:00
# auto-leave-insert-mode (Bool):
# Whether to leave insert mode if a non-editable element is clicked.
# Valid values: true, false
# Default: true
auto-leave-insert-mode = true
2017-05-05 01:47:33 -05:00
# auto-insert-mode (Bool):
# Whether to automatically enter insert mode if an editable element
# is focused after page load.
# Valid values: true, false
# Default: false
auto-insert-mode = false
2017-05-05 01:47:33 -05:00
# forward-unbound-keys (String):
# Whether to forward unbound keys to the webview in normal mode.
# all: Forward all unbound keys.
# auto: Forward unbound non-alphanumeric keys.
# none: Don't forward any keys.
# Default: auto
forward-unbound-keys = auto
2017-05-05 01:47:33 -05:00
# spatial-navigation (Bool):
# Enables or disables the Spatial Navigation feature.
# Spatial navigation consists in the ability to navigate between
# focusable elements in a Web page, such as hyperlinks and form
# controls, by using Left, Right, Up and Down arrow keys. For
# example, if a user presses the Right key, heuristics determine
# whether there is an element he might be trying to reach towards
# the right and which element he probably wants.
# Valid values: true, false
# Default: false
spatial-navigation = false
2017-05-05 01:47:33 -05:00
# links-included-in-focus-chain (Bool):
# Whether hyperlinks should be included in the keyboard focus chain.
# Valid values: true, false
# Default: true
links-included-in-focus-chain = true
2017-05-05 01:47:33 -05:00
# rocker-gestures (Bool):
# Whether to enable Opera-like mouse rocker gestures. This disables
# the context menu.
# Valid values: true, false
# Default: false
rocker-gestures = false
2017-05-05 01:47:33 -05:00
# mouse-zoom-divider (Int):
# How much to divide the mouse wheel movements to translate them
# into zoom increments.
# Default: 512
mouse-zoom-divider = 512
2017-05-05 01:47:33 -05:00
# Configuration of the tab bar.
[tabs]
2017-05-05 01:47:33 -05:00
# background-tabs (Bool):
# Whether to open new tabs (middleclick/ctrl+click) in background.
# Valid values: true, false
# Default: false
background-tabs = false
2017-05-05 01:47:33 -05:00
# select-on-remove (SelectOnRemove):
# Which tab to select when the focused tab is removed.
# prev: Select the tab which came before the closed one (left in
# horizontal, above in vertical).
# next: Select the tab which came after the closed one (right in
# horizontal, below in vertical).
# last-used: Select the previously selected tab.
# Default: next
select-on-remove = next
2017-05-05 01:47:33 -05:00
# new-tab-position (NewTabPosition):
# How new tabs are positioned.
# prev: Before the current tab.
# next: After the current tab.
# first: At the beginning.
# last: At the end.
# Default: next
new-tab-position = next
2017-05-05 01:47:33 -05:00
# new-tab-position-explicit (NewTabPosition):
# How new tabs opened explicitly are positioned.
# prev: Before the current tab.
# next: After the current tab.
# first: At the beginning.
# last: At the end.
# Default: last
new-tab-position-explicit = last
2017-05-05 01:47:33 -05:00
# last-close (String):
# Behavior when the last tab is closed.
# ignore: Don't do anything.
# blank: Load a blank page.
# startpage: Load the start page.
# default-page: Load the default page.
# close: Close the window.
# Default: ignore
last-close = ignore
2017-05-05 01:47:33 -05:00
# show (String):
# When to show the tab bar
# always: Always show the tab bar.
# never: Always hide the tab bar.
# multiple: Hide the tab bar if only one tab is open.
# switching: Show the tab bar when switching tabs.
# Default: always
show = switching
2017-05-05 01:47:33 -05:00
# show-switching-delay (Int):
# Time to show the tab bar before hiding it when tabs->show is set
# to 'switching'.
# Default: 800
show-switching-delay = 800
2017-05-05 01:47:33 -05:00
# wrap (Bool):
# Whether to wrap when changing tabs.
# Valid values: true, false
# Default: true
wrap = true
2017-05-05 01:47:33 -05:00
# movable (Bool):
# Whether tabs should be movable.
# Valid values: true, false
# Default: true
movable = true
2017-05-05 01:47:33 -05:00
# close-mouse-button (String):
# On which mouse button to close tabs.
# right: Close tabs on right-click.
# middle: Close tabs on middle-click.
# none: Don't close tabs using the mouse.
# Default: middle
close-mouse-button = middle
2017-05-05 01:47:33 -05:00
# position (Position):
# The position of the tab bar.
# Valid values: top, bottom, left, right
# Default: top
position = top
2017-05-05 01:47:33 -05:00
# show-favicons (Bool):
# Whether to show favicons in the tab bar.
# Valid values: true, false
# Default: true
show-favicons = true
# favicon-scale (Float):
# Scale for favicons in the tab bar. The tab size is unchanged, so
# big favicons also require extra `tabs->padding`.
# Default: 1.0
favicon-scale = 1.0
2017-05-05 01:47:33 -05:00
# width (PercOrInt):
# The width of the tab bar if it's vertical, in px or as percentage
# of the window.
# Default: 20%
width = 20%
# pinned-width (Int):
# The width for pinned tabs with a horizontal tabbar, in px.
# Default: 43
pinned-width = 43
2017-05-05 01:47:33 -05:00
# indicator-width (Int):
# Width of the progress indicator (0 to disable).
# Default: 3
indicator-width = 3
2017-05-05 01:47:33 -05:00
# tabs-are-windows (Bool):
# Whether to open windows instead of tabs.
# Valid values: true, false
# Default: false
tabs-are-windows = false
2017-05-05 01:47:33 -05:00
# title-format (FormatString):
# The format to use for the tab title. The following placeholders
# are defined:
# * `{perc}`: The percentage as a string like `[10%]`.
# * `{perc_raw}`: The raw percentage, e.g. `10`
# * `{title}`: The title of the current web page
# * `{title_sep}`: The string ` - ` if a title is set, empty
# otherwise.
# * `{index}`: The index of this tab.
# * `{id}`: The internal tab ID of this tab.
# * `{scroll_pos}`: The page scroll position.
# * `{host}`: The host of the current web page.
# * `{backend}`: Either 'webkit' or 'webengine'
# * `{private}` : Indicates when private mode is enabled.
2017-05-05 01:47:33 -05:00
# Default: {index}: {title}
title-format = {title}
# title-format-pinned (FormatString):
# The format to use for the tab title for pinned tabs. The same
# placeholders like for title-format are defined.
# Default: {index}
title-format-pinned =
2017-05-05 01:47:33 -05:00
# title-alignment (TextAlignment):
# Alignment of the text inside of tabs
# Valid values: left, right, center
# Default: left
title-alignment = left
2017-05-05 01:47:33 -05:00
# mousewheel-tab-switching (Bool):
# Switch between tabs using the mouse wheel.
# Valid values: true, false
# Default: true
mousewheel-tab-switching = true
2017-05-05 01:47:33 -05:00
# padding (Padding):
# Padding for tabs (top, bottom, left, right).
# Default: 0,0,5,5
padding = 0,0,5,5
2017-05-05 01:47:33 -05:00
# indicator-padding (Padding):
# Padding for indicators (top, bottom, left, right).
# Default: 2,2,0,4
indicator-padding = 2,2,0,4
2017-05-05 01:47:33 -05:00
# Settings related to cache and storage.
[storage]
2017-05-05 01:47:33 -05:00
# download-directory (Directory):
# The directory to save downloads to. An empty value selects a
# sensible os-specific default. Will expand environment variables.
# Default:
download-directory =
2017-05-05 01:47:33 -05:00
# prompt-download-directory (Bool):
# Whether to prompt the user for the download location.
# If set to false, 'download-directory' will be used.
# Valid values: true, false
# Default: true
prompt-download-directory = true
2017-05-05 01:47:33 -05:00
# remember-download-directory (Bool):
# Whether to remember the last used download directory.
# Valid values: true, false
# Default: true
remember-download-directory = true
2017-05-05 01:47:33 -05:00
# maximum-pages-in-cache (Int):
# The maximum number of pages to hold in the global memory page
# cache.
# The Page Cache allows for a nicer user experience when navigating
# forth or back to pages in the forward/back history, by pausing and
# resuming up to _n_ pages.
# For more information about the feature, please refer to:
# http://webkit.org/blog/427/webkit-page-cache-i-the-basics/
# Default: 0
maximum-pages-in-cache = 0
# offline-web-application-cache (Bool):
2017-05-05 01:47:33 -05:00
# Whether support for the HTML 5 web application cache feature is
# enabled.
# An application cache acts like an HTTP cache in some sense. For
# documents that use the application cache via JavaScript, the
# loader engine will first ask the application cache for the
# contents, before hitting the network.
# The feature is described in details at:
# http://dev.w3.org/html5/spec/Overview.html#appcache
# Valid values: true, false
# Default: true
offline-web-application-cache = true
2017-05-05 01:47:33 -05:00
# local-storage (Bool):
# Whether support for HTML 5 local storage and Web SQL is enabled.
2017-05-05 01:47:33 -05:00
# Valid values: true, false
# Default: true
local-storage = true
2017-05-05 01:47:33 -05:00
# cache-size (Int):
# Size of the HTTP network cache. Empty to use the default value.
# Default:
cache-size =
2017-05-05 01:47:33 -05:00
2017-05-05 01:47:33 -05:00
# Loaded plugins/scripts and allowed actions.
[content]
2017-05-05 01:47:33 -05:00
# allow-images (Bool):
# Whether images are automatically loaded in web pages.
# Valid values: true, false
# Default: true
allow-images = true
2017-05-05 01:47:33 -05:00
# allow-javascript (Bool):
# Enables or disables the running of JavaScript programs.
# Valid values: true, false
# Default: true
allow-javascript = true
2017-05-05 01:47:33 -05:00
# allow-plugins (Bool):
# Enables or disables plugins in Web pages.
# Qt plugins with a mimetype such as "application/x-qt-plugin" are
# not affected by this setting.
# Valid values: true, false
# Default: false
allow-plugins = false
2017-05-05 01:47:33 -05:00
# webgl (Bool):
# Enables or disables WebGL.
# Valid values: true, false
# Default: true
webgl = true
2017-05-05 01:47:33 -05:00
# hyperlink-auditing (Bool):
# Enable or disable hyperlink auditing (<a ping>).
# Valid values: true, false
# Default: false
hyperlink-auditing = false
2017-05-05 01:47:33 -05:00
# geolocation (BoolAsk):
# Allow websites to request geolocations.
# Valid values: true, false, ask
# Default: ask
geolocation = ask
2017-05-05 01:47:33 -05:00
# notifications (BoolAsk):
# Allow websites to show notifications.
# Valid values: true, false, ask
# Default: ask
notifications = ask
2017-05-05 01:47:33 -05:00
# media-capture (BoolAsk):
# Allow websites to record audio/video.
# Valid values: true, false, ask
# Default: ask
media-capture = ask
2017-05-05 01:47:33 -05:00
# javascript-can-open-windows-automatically (Bool):
# Whether JavaScript programs can open new windows without user
# interaction.
# Valid values: true, false
# Default: false
javascript-can-open-windows-automatically = false
2017-05-05 01:47:33 -05:00
# javascript-can-close-windows (Bool):
# Whether JavaScript programs can close windows.
# Valid values: true, false
# Default: false
javascript-can-close-windows = false
2017-05-05 01:47:33 -05:00
# javascript-can-access-clipboard (Bool):
# Whether JavaScript programs can read or write to the clipboard.
# With QtWebEngine, writing the clipboard as response to a user
# interaction is always allowed.
# Valid values: true, false
# Default: false
javascript-can-access-clipboard = false
2017-05-05 01:47:33 -05:00
# ignore-javascript-prompt (Bool):
# Whether all javascript prompts should be ignored.
# Valid values: true, false
# Default: false
ignore-javascript-prompt = false
2017-05-05 01:47:33 -05:00
# ignore-javascript-alert (Bool):
# Whether all javascript alerts should be ignored.
# Valid values: true, false
# Default: false
ignore-javascript-alert = false
2017-05-05 01:47:33 -05:00
# local-content-can-access-remote-urls (Bool):
# Whether locally loaded documents are allowed to access remote
# urls.
# Valid values: true, false
# Default: false
local-content-can-access-remote-urls = false
2017-05-05 01:47:33 -05:00
# local-content-can-access-file-urls (Bool):
# Whether locally loaded documents are allowed to access other local
# urls.
# Valid values: true, false
# Default: true
local-content-can-access-file-urls = true
2017-05-05 01:47:33 -05:00
# cookies-accept (String):
# Control which cookies to accept.
# all: Accept all cookies.
# no-3rdparty: Accept cookies from the same origin only.
# no-unknown-3rdparty: Accept cookies from the same origin only,
# unless a cookie is already set for the domain.
# never: Don't accept cookies at all.
# Default: no-3rdparty
cookies-accept = no-3rdparty
2017-05-05 01:47:33 -05:00
# cookies-store (Bool):
# Whether to store cookies. Note this option needs a restart with
# QtWebEngine on Qt < 5.9.
2017-05-05 01:47:33 -05:00
# Valid values: true, false
# Default: true
cookies-store = true
2017-05-05 01:47:33 -05:00
# host-block-lists (List of Url):
# List of URLs of lists which contain hosts to block.
# The file can be in one of the following formats:
# - An '/etc/hosts'-like file
# - One host per line
# - A zip-file of any of the above, with either only one file, or a
# file named 'hosts' (with any extension).
# Default:
# https://www.malwaredomainlist.com/hostslist/hosts.txt,http://someonewhocares.org/hosts/hosts,http://winhelp2002.mvps.org/hosts.zip,http://malwaredomains.lehigh.edu/files/justdomains.zip,https://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
host-block-lists = https://www.malwaredomainlist.com/hostslist/hosts.txt,http://someonewhocares.org/hosts/hosts,http://winhelp2002.mvps.org/hosts.zip,http://malwaredomains.lehigh.edu/files/justdomains.zip,https://pgl.yoyo.org/adservers/serverlist.php?hostformat=hosts&mimetype=plaintext
2017-05-05 01:47:33 -05:00
# host-blocking-enabled (Bool):
# Whether host blocking is enabled.
# Valid values: true, false
# Default: true
host-blocking-enabled = true
2017-05-05 01:47:33 -05:00
# host-blocking-whitelist (List of String):
# List of domains that should always be loaded, despite being
# ad-blocked.
# Domains may contain * and ? wildcards and are otherwise required
# to exactly match the requested domain.
# Local domains are always exempt from hostblocking.
# Default: piwik.org
host-blocking-whitelist = piwik.org
2017-05-05 01:47:33 -05:00
# enable-pdfjs (Bool):
# Enable pdf.js to view PDF files in the browser.
# Note that the files can still be downloaded by clicking the
# download button in the pdf.js viewer.
# Valid values: true, false
# Default: false
enable-pdfjs = false
2017-05-05 01:47:33 -05:00
# Hinting settings.
[hints]
2017-05-05 01:47:33 -05:00
# border (String):
# CSS border value for hints.
# Default: 1px solid #E3BE23
border = 1px solid #E3BE23
2017-05-05 01:47:33 -05:00
# mode (String):
# Mode to use for hints.
# number: Use numeric hints. (In this mode you can also type
# letters form the hinted element to filter and reduce the number of
# elements that are hinted.)
# letter: Use the chars in the hints -> chars setting.
# word: Use hints words based on the html elements and the extra
# words.
# Default: letter
mode = letter
2017-05-05 01:47:33 -05:00
# chars (UniqueCharString):
# Chars used for hint strings.
# Default: asdfghjkl
chars = asdfghjkl
2017-05-05 01:47:33 -05:00
# min-chars (Int):
# Minimum number of chars used for hint strings.
# Default: 1
min-chars = 1
2017-05-05 01:47:33 -05:00
# scatter (Bool):
# Whether to scatter hint key chains (like Vimium) or not (like
# dwb). Ignored for number hints.
# Valid values: true, false
# Default: true
scatter = true
2017-05-05 01:47:33 -05:00
# uppercase (Bool):
# Make chars in hint strings uppercase.
# Valid values: true, false
# Default: false
uppercase = false
2017-05-05 01:47:33 -05:00
# dictionary (File):
# The dictionary file to be used by the word hints.
# Default: /usr/share/dict/words
dictionary = /usr/share/dict/words
2017-05-05 01:47:33 -05:00
# auto-follow (String):
# Controls when a hint can be automatically followed without the
# user pressing Enter.
# always: Auto-follow whenever there is only a single hint on a
# page.
# unique-match: Auto-follow whenever there is a unique non-empty
# match in either the hint string (word mode) or filter (number
# mode).
# full-match: Follow the hint when the user typed the whole hint
# (letter, word or number mode) or the element's text (only in
# number mode).
# never: The user will always need to press Enter to follow a
# hint.
# Default: unique-match
auto-follow = unique-match
2017-05-05 01:47:33 -05:00
# auto-follow-timeout (Int):
# A timeout (in milliseconds) to inhibit normal-mode key bindings
# after a successful auto-follow.
# Default: 0
auto-follow-timeout = 0
2017-05-05 01:47:33 -05:00
# next-regexes (List of Regex):
# A comma-separated list of regexes to use for 'next' links.
# Default:
# \bnext\b,\bmore\b,\bnewer\b,\b[>→≫]\b,\b(>>|»)\b,\bcontinue\b
next-regexes = \bnext\b,\bmore\b,\bnewer\b,\b[>→≫]\b,\b(>>|»)\b,\bcontinue\b
2017-05-05 01:47:33 -05:00
# prev-regexes (List of Regex):
# A comma-separated list of regexes to use for 'prev' links.
# Default: \bprev(ious)?\b,\bback\b,\bolder\b,\b[<←≪]\b,\b(<<|«)\b
prev-regexes = \bprev(ious)?\b,\bback\b,\bolder\b,\b[<←≪]\b,\b(<<|«)\b
2017-05-05 01:47:33 -05:00
# find-implementation (String):
# Which implementation to use to find elements to hint.
# javascript: Better but slower
# python: Slightly worse but faster
# Default: python
find-implementation = python
2017-05-05 01:47:33 -05:00
# hide-unmatched-rapid-hints (Bool):
# Controls hiding unmatched hints in rapid mode.
# Valid values: true, false
# Default: true
hide-unmatched-rapid-hints = true
2017-05-05 01:47:33 -05:00
# Definitions of search engines which can be used via the address bar.
# The searchengine named `DEFAULT` is used when `general -> auto-search`
# is true and something else than a URL was entered to be opened. Other
# search engines can be used by prepending the search engine name to the
# search term, e.g. `:open google qutebrowser`. The string `{}` will be
# replaced by the search term, use `{{` and `}}` for literal `{`/`}`
# signs.
[searchengines]
2017-05-05 01:47:33 -05:00
DEFAULT = https://duckduckgo.com/?q={}
2017-05-05 01:47:33 -05:00
# Aliases for commands.
# By default, no aliases are defined. Example which adds a new command
# `:qtb` to open qutebrowsers website:
# `qtb = open https://www.qutebrowser.org/`
[aliases]
2017-05-05 01:47:33 -05:00
# Colors used in the UI.
# A value can be in one of the following format:
# * `#RGB`/`#RRGGBB`/`#RRRGGGBBB`/`#RRRRGGGGBBBB`
# * An SVG color name as specified in http://www.w3.org/TR/SVG/types.html#ColorKeywords[the W3C specification].
# * transparent (no color)
# * `rgb(r, g, b)` / `rgba(r, g, b, a)` (values 0-255 or percentages)
# * `hsv(h, s, v)` / `hsva(h, s, v, a)` (values 0-255, hue 0-359)
# * A gradient as explained in http://doc.qt.io/qt-5/stylesheet-reference.html#list-of-property-types[the Qt documentation] under ``Gradient''.
# A *.system value determines the color system to use for color
# interpolation between similarly-named *.start and *.stop entries,
# regardless of how they are defined in the options. Valid values are
# 'rgb', 'hsv', and 'hsl'.
# The `hints.*` values are a special case as they're real CSS colors, not Qt-CSS colors. There, for a gradient, you need to use `-webkit-gradient`, see https://www.webkit.org/blog/175/introducing-css-gradients/[the WebKit documentation].
[colors]
2017-05-05 01:47:33 -05:00
# completion.fg (QtColor):
# Text color of the completion widget.
# Default: white
completion.fg = white
2017-05-05 01:47:33 -05:00
# completion.bg (QssColor):
# Background color of the completion widget.
# Default: #333333
completion.bg = #333333
2017-05-05 01:47:33 -05:00
# completion.alternate-bg (QssColor):
# Alternating background color of the completion widget.
# Default: #444444
completion.alternate-bg = #444444
2017-05-05 01:47:33 -05:00
# completion.category.fg (QtColor):
# Foreground color of completion widget category headers.
# Default: white
completion.category.fg = white
2017-05-05 01:47:33 -05:00
# completion.category.bg (QssColor):
# Background color of the completion widget category headers.
# Default: qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 #888888,
# stop:1 #505050)
completion.category.bg = qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 #888888, stop:1 #505050)
2017-05-05 01:47:33 -05:00
# completion.category.border.top (QssColor):
# Top border color of the completion widget category headers.
# Default: black
completion.category.border.top = black
2017-05-05 01:47:33 -05:00
# completion.category.border.bottom (QssColor):
# Bottom border color of the completion widget category headers.
# Default: ${completion.category.border.top}
completion.category.border.bottom = ${completion.category.border.top}
2017-05-05 01:47:33 -05:00
# completion.item.selected.fg (QtColor):
# Foreground color of the selected completion item.
# Default: black
completion.item.selected.fg = black
2017-05-05 01:47:33 -05:00
# completion.item.selected.bg (QssColor):
# Background color of the selected completion item.
# Default: #e8c000
completion.item.selected.bg = #e8c000
2017-05-05 01:47:33 -05:00
# completion.item.selected.border.top (QssColor):
# Top border color of the completion widget category headers.
# Default: #bbbb00
completion.item.selected.border.top = #bbbb00
2017-05-05 01:47:33 -05:00
# completion.item.selected.border.bottom (QssColor):
# Bottom border color of the selected completion item.
# Default: ${completion.item.selected.border.top}
completion.item.selected.border.bottom = ${completion.item.selected.border.top}
2017-05-05 01:47:33 -05:00
# completion.match.fg (QssColor):
# Foreground color of the matched text in the completion.
# Default: #ff4444
completion.match.fg = #ff4444
2017-05-05 01:47:33 -05:00
# completion.scrollbar.fg (QssColor):
# Color of the scrollbar handle in completion view.
# Default: ${completion.fg}
completion.scrollbar.fg = ${completion.fg}
2017-05-05 01:47:33 -05:00
# completion.scrollbar.bg (QssColor):
# Color of the scrollbar in completion view
# Default: ${completion.bg}
completion.scrollbar.bg = ${completion.bg}
2017-05-05 01:47:33 -05:00
# statusbar.fg (QssColor):
# Foreground color of the statusbar.
# Default: white
statusbar.fg = white
2017-05-05 01:47:33 -05:00
# statusbar.bg (QssColor):
# Background color of the statusbar.
# Default: black
statusbar.bg = black
# statusbar.fg.private (QssColor):
# Foreground color of the statusbar in private browsing mode.
# Default: ${statusbar.fg}
statusbar.fg.private = ${statusbar.fg}
# statusbar.bg.private (QssColor):
# Background color of the statusbar in private browsing mode.
# Default: #666666
statusbar.bg.private = #666666
2017-05-05 01:47:33 -05:00
# statusbar.fg.insert (QssColor):
# Foreground color of the statusbar in insert mode.
# Default: ${statusbar.fg}
statusbar.fg.insert = ${statusbar.fg}
2017-05-05 01:47:33 -05:00
# statusbar.bg.insert (QssColor):
# Background color of the statusbar in insert mode.
# Default: darkgreen
statusbar.bg.insert = darkgreen
2017-05-05 01:47:33 -05:00
# statusbar.fg.command (QssColor):
# Foreground color of the statusbar in command mode.
# Default: ${statusbar.fg}
statusbar.fg.command = ${statusbar.fg}
2017-05-05 01:47:33 -05:00
# statusbar.bg.command (QssColor):
# Background color of the statusbar in command mode.
# Default: ${statusbar.bg}
statusbar.bg.command = ${statusbar.bg}
# statusbar.fg.command.private (QssColor):
# Foreground color of the statusbar in private browsing + command
# mode.
# Default: ${statusbar.fg.private}
statusbar.fg.command.private = ${statusbar.fg.private}
# statusbar.bg.command.private (QssColor):
# Background color of the statusbar in private browsing + command
# mode.
# Default: ${statusbar.bg.private}
statusbar.bg.command.private = ${statusbar.bg.private}
2017-05-05 01:47:33 -05:00
# statusbar.fg.caret (QssColor):
# Foreground color of the statusbar in caret mode.
# Default: ${statusbar.fg}
statusbar.fg.caret = ${statusbar.fg}
2017-05-05 01:47:33 -05:00
# statusbar.bg.caret (QssColor):
# Background color of the statusbar in caret mode.
# Default: purple
statusbar.bg.caret = purple
2017-05-05 01:47:33 -05:00
# statusbar.fg.caret-selection (QssColor):
# Foreground color of the statusbar in caret mode with a selection
# Default: ${statusbar.fg}
statusbar.fg.caret-selection = ${statusbar.fg}
2017-05-05 01:47:33 -05:00
# statusbar.bg.caret-selection (QssColor):
# Background color of the statusbar in caret mode with a selection
# Default: #a12dff
statusbar.bg.caret-selection = #a12dff
2017-05-05 01:47:33 -05:00
# statusbar.progress.bg (QssColor):
# Background color of the progress bar.
# Default: white
statusbar.progress.bg = white
2017-05-05 01:47:33 -05:00
# statusbar.url.fg (QssColor):
# Default foreground color of the URL in the statusbar.
# Default: ${statusbar.fg}
statusbar.url.fg = ${statusbar.fg}
2017-05-05 01:47:33 -05:00
# statusbar.url.fg.success (QssColor):
# Foreground color of the URL in the statusbar on successful load
# (http).
# Default: white
statusbar.url.fg.success = white
2017-05-05 01:47:33 -05:00
# statusbar.url.fg.success.https (QssColor):
# Foreground color of the URL in the statusbar on successful load
# (https).
# Default: lime
statusbar.url.fg.success.https = lime
2017-05-05 01:47:33 -05:00
# statusbar.url.fg.error (QssColor):
# Foreground color of the URL in the statusbar on error.
# Default: orange
statusbar.url.fg.error = orange
2017-05-05 01:47:33 -05:00
# statusbar.url.fg.warn (QssColor):
# Foreground color of the URL in the statusbar when there's a
# warning.
# Default: yellow
statusbar.url.fg.warn = yellow
2017-05-05 01:47:33 -05:00
# statusbar.url.fg.hover (QssColor):
# Foreground color of the URL in the statusbar for hovered links.
# Default: aqua
statusbar.url.fg.hover = aqua
2017-05-05 01:47:33 -05:00
# tabs.fg.odd (QtColor):
# Foreground color of unselected odd tabs.
# Default: white
tabs.fg.odd = white
2017-05-05 01:47:33 -05:00
# tabs.bg.odd (QtColor):
# Background color of unselected odd tabs.
# Default: grey
tabs.bg.odd = grey
2017-05-05 01:47:33 -05:00
# tabs.fg.even (QtColor):
# Foreground color of unselected even tabs.
# Default: white
tabs.fg.even = white
2017-05-05 01:47:33 -05:00
# tabs.bg.even (QtColor):
# Background color of unselected even tabs.
# Default: darkgrey
tabs.bg.even = darkgrey
2017-05-05 01:47:33 -05:00
# tabs.fg.selected.odd (QtColor):
# Foreground color of selected odd tabs.
# Default: white
tabs.fg.selected.odd = white
2017-05-05 01:47:33 -05:00
# tabs.bg.selected.odd (QtColor):
# Background color of selected odd tabs.
# Default: black
tabs.bg.selected.odd = black
2017-05-05 01:47:33 -05:00
# tabs.fg.selected.even (QtColor):
# Foreground color of selected even tabs.
# Default: ${tabs.fg.selected.odd}
tabs.fg.selected.even = ${tabs.fg.selected.odd}
2017-05-05 01:47:33 -05:00
# tabs.bg.selected.even (QtColor):
# Background color of selected even tabs.
# Default: ${tabs.bg.selected.odd}
tabs.bg.selected.even = ${tabs.bg.selected.odd}
2017-05-05 01:47:33 -05:00
# tabs.bg.bar (QtColor):
# Background color of the tab bar.
# Default: #555555
tabs.bg.bar = #555555
2017-05-05 01:47:33 -05:00
# tabs.indicator.start (QtColor):
# Color gradient start for the tab indicator.
# Default: #0000aa
tabs.indicator.start = #0000aa
2017-05-05 01:47:33 -05:00
# tabs.indicator.stop (QtColor):
# Color gradient end for the tab indicator.
# Default: #00aa00
tabs.indicator.stop = #00aa00
2017-05-05 01:47:33 -05:00
# tabs.indicator.error (QtColor):
# Color for the tab indicator on errors..
# Default: #ff0000
tabs.indicator.error = #ff0000
2017-05-05 01:47:33 -05:00
# tabs.indicator.system (ColorSystem):
# Color gradient interpolation system for the tab indicator.
# rgb: Interpolate in the RGB color system.
# hsv: Interpolate in the HSV color system.
# hsl: Interpolate in the HSL color system.
# none: Don't show a gradient.
# Default: rgb
tabs.indicator.system = rgb
2017-05-05 01:47:33 -05:00
# hints.fg (QssColor):
# Font color for hints.
# Default: black
hints.fg = black
2017-05-05 01:47:33 -05:00
# hints.bg (QssColor):
# Background color for hints. Note that you can use a `rgba(...)`
# value for transparency.
# Default: qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 rgba(255,
# 247, 133, 0.8), stop:1 rgba(255, 197, 66, 0.8))
hints.bg = qlineargradient(x1:0, y1:0, x2:0, y2:1, stop:0 rgba(255, 247, 133, 0.8), stop:1 rgba(255, 197, 66, 0.8))
2017-05-05 01:47:33 -05:00
# hints.fg.match (QssColor):
# Font color for the matched part of hints.
# Default: green
hints.fg.match = green
2017-05-05 01:47:33 -05:00
# downloads.bg.bar (QssColor):
# Background color for the download bar.
# Default: black
downloads.bg.bar = black
2017-05-05 01:47:33 -05:00
# downloads.fg.start (QtColor):
# Color gradient start for download text.
# Default: white
downloads.fg.start = white
2017-05-05 01:47:33 -05:00
# downloads.bg.start (QtColor):
# Color gradient start for download backgrounds.
# Default: #0000aa
downloads.bg.start = #0000aa
2017-05-05 01:47:33 -05:00
# downloads.fg.stop (QtColor):
# Color gradient end for download text.
# Default: ${downloads.fg.start}
downloads.fg.stop = ${downloads.fg.start}
2017-05-05 01:47:33 -05:00
# downloads.bg.stop (QtColor):
# Color gradient stop for download backgrounds.
# Default: #00aa00
downloads.bg.stop = #00aa00
2017-05-05 01:47:33 -05:00
# downloads.fg.system (ColorSystem):
# Color gradient interpolation system for download text.
# rgb: Interpolate in the RGB color system.
# hsv: Interpolate in the HSV color system.
# hsl: Interpolate in the HSL color system.
# none: Don't show a gradient.
# Default: rgb
downloads.fg.system = rgb
2017-05-05 01:47:33 -05:00
# downloads.bg.system (ColorSystem):
# Color gradient interpolation system for download backgrounds.
# rgb: Interpolate in the RGB color system.
# hsv: Interpolate in the HSV color system.
# hsl: Interpolate in the HSL color system.
# none: Don't show a gradient.
# Default: rgb
downloads.bg.system = rgb
2017-05-05 01:47:33 -05:00
# downloads.fg.error (QtColor):
# Foreground color for downloads with errors.
# Default: white
downloads.fg.error = white
2017-05-05 01:47:33 -05:00
# downloads.bg.error (QtColor):
# Background color for downloads with errors.
# Default: red
downloads.bg.error = red
2017-05-05 01:47:33 -05:00
# webpage.bg (QtColor):
# Background color for webpages if unset (or empty to use the
# theme's color)
# Default: white
webpage.bg = white
2017-05-05 01:47:33 -05:00
# keyhint.fg (QssColor):
# Text color for the keyhint widget.
# Default: #FFFFFF
keyhint.fg = #FFFFFF
2017-05-05 01:47:33 -05:00
# keyhint.fg.suffix (CssColor):
# Highlight color for keys to complete the current keychain
# Default: #FFFF00
keyhint.fg.suffix = #FFFF00
2017-05-05 01:47:33 -05:00
# keyhint.bg (QssColor):
# Background color of the keyhint widget.
# Default: rgba(0, 0, 0, 80%)
keyhint.bg = rgba(0, 0, 0, 80%)
2017-05-05 01:47:33 -05:00
# messages.fg.error (QssColor):
# Foreground color of an error message.
# Default: white
messages.fg.error = white
2017-05-05 01:47:33 -05:00
# messages.bg.error (QssColor):
# Background color of an error message.
# Default: red
messages.bg.error = red
2017-05-05 01:47:33 -05:00
# messages.border.error (QssColor):
# Border color of an error message.
# Default: #bb0000
messages.border.error = #bb0000
2017-05-05 01:47:33 -05:00
# messages.fg.warning (QssColor):
# Foreground color a warning message.
# Default: white
messages.fg.warning = white
2017-05-05 01:47:33 -05:00
# messages.bg.warning (QssColor):
# Background color of a warning message.
# Default: darkorange
messages.bg.warning = darkorange
2017-05-05 01:47:33 -05:00
# messages.border.warning (QssColor):
# Border color of an error message.
# Default: #d47300
messages.border.warning = #d47300
2017-05-05 01:47:33 -05:00
# messages.fg.info (QssColor):
# Foreground color an info message.
# Default: white
messages.fg.info = white
2017-05-05 01:47:33 -05:00
# messages.bg.info (QssColor):
# Background color of an info message.
# Default: black
messages.bg.info = black
2017-05-05 01:47:33 -05:00
# messages.border.info (QssColor):
# Border color of an info message.
# Default: #333333
messages.border.info = #333333
2017-05-05 01:47:33 -05:00
# prompts.fg (QssColor):
# Foreground color for prompts.
# Default: white
prompts.fg = white
2017-05-05 01:47:33 -05:00
# prompts.bg (QssColor):
# Background color for prompts.
# Default: darkblue
prompts.bg = darkblue
2017-05-05 01:47:33 -05:00
# prompts.selected.bg (QssColor):
# Background color for the selected item in filename prompts.
# Default: #308cc6
prompts.selected.bg = #308cc6
2017-05-05 01:47:33 -05:00
# Fonts used for the UI, with optional style/weight/size.
# * Style: `normal`/`italic`/`oblique`
# * Weight: `normal`, `bold`, `100`..`900`
# * Size: _number_ `px`/`pt`
[fonts]
2017-05-05 01:47:33 -05:00
# _monospace (Font):
# Default monospace fonts.
# Default: xos4 Terminus, Terminus, Monospace, "DejaVu Sans Mono",
# Monaco, "Bitstream Vera Sans Mono", "Andale Mono", "Courier New",
# Courier, "Liberation Mono", monospace, Fixed, Consolas, Terminal
_monospace = Iosevka, Monospace, "DejaVu Sans Mono", Monaco, "Bitstream Vera Sans Mono", "Andale Mono", "Courier New", Courier, "Liberation Mono", monospace, Fixed, Consolas, Terminal
2017-05-05 01:47:33 -05:00
# completion (Font):
# Font used in the completion widget.
# Default: 8pt ${_monospace}
completion = 9pt ${_monospace}
2017-05-05 01:47:33 -05:00
# completion.category (Font):
# Font used in the completion categories.
# Default: bold ${completion}
completion.category = bold ${completion}
2017-05-05 01:47:33 -05:00
# tabbar (QtFont):
# Font used in the tab bar.
# Default: 8pt ${_monospace}
tabbar = 8pt ${_monospace}
2017-05-05 01:47:33 -05:00
# statusbar (Font):
# Font used in the statusbar.
# Default: 8pt ${_monospace}
statusbar = 8pt ${_monospace}
2017-05-05 01:47:33 -05:00
# downloads (Font):
# Font used for the downloadbar.
# Default: 8pt ${_monospace}
downloads = 8pt ${_monospace}
2017-05-05 01:47:33 -05:00
# hints (Font):
# Font used for the hints.
# Default: bold 13px ${_monospace}
hints = bold 13px ${_monospace}
2017-05-05 01:47:33 -05:00
# debug-console (QtFont):
# Font used for the debugging console.
# Default: 8pt ${_monospace}
debug-console = 8pt ${_monospace}
2017-05-05 01:47:33 -05:00
# web-family-standard (FontFamily):
# Font family for standard fonts.
# Default:
web-family-standard =
2017-05-05 01:47:33 -05:00
# web-family-fixed (FontFamily):
# Font family for fixed fonts.
# Default:
web-family-fixed =
2017-05-05 01:47:33 -05:00
# web-family-serif (FontFamily):
# Font family for serif fonts.
# Default:
web-family-serif =
2017-05-05 01:47:33 -05:00
# web-family-sans-serif (FontFamily):
# Font family for sans-serif fonts.
# Default:
web-family-sans-serif =
2017-05-05 01:47:33 -05:00
# web-family-cursive (FontFamily):
# Font family for cursive fonts.
# Default:
web-family-cursive =
2017-05-05 01:47:33 -05:00
# web-family-fantasy (FontFamily):
# Font family for fantasy fonts.
# Default:
web-family-fantasy =
2017-05-05 01:47:33 -05:00
# web-size-minimum (Int):
# The hard minimum font size.
# Default: 0
web-size-minimum = 0
2017-05-05 01:47:33 -05:00
# web-size-minimum-logical (Int):
# The minimum logical font size that is applied when zooming out.
# Default: 6
web-size-minimum-logical = 6
2017-05-05 01:47:33 -05:00
# web-size-default (Int):
# The default font size for regular text.
# Default: 16
web-size-default = 16
2017-05-05 01:47:33 -05:00
# web-size-default-fixed (Int):
# The default font size for fixed-pitch text.
# Default: 13
web-size-default-fixed = 13
2017-05-05 01:47:33 -05:00
# keyhint (Font):
# Font used in the keyhint widget.
# Default: 8pt ${_monospace}
keyhint = 8pt ${_monospace}
2017-05-05 01:47:33 -05:00
# messages.error (Font):
# Font used for error messages.
# Default: 8pt ${_monospace}
messages.error = 8pt ${_monospace}
2017-05-05 01:47:33 -05:00
# messages.warning (Font):
# Font used for warning messages.
# Default: 8pt ${_monospace}
messages.warning = 8pt ${_monospace}
2017-05-05 01:47:33 -05:00
# messages.info (Font):
# Font used for info messages.
# Default: 8pt ${_monospace}
messages.info = 8pt ${_monospace}
2017-05-05 01:47:33 -05:00
# prompts (Font):
# Font used for prompts.
# Default: 8pt sans-serif
2018-10-22 20:05:34 -05:00
prompts = 8pt ${_monospace}