WIP

.gitignore

@@ -0,0 +1 @@
+*.log

zofle/build.bash

@@ -1,15 +1,22 @@
 #!/usr/bin/env bash
 
-ZMK_DOCKER_IMAGE="${ZMK_DOCKER_IMAGE:-zmkfirmware/zmk-build-arm:stable}"
+ZMK_DOCKER_IMAGE="${ZMK_DOCKER_IMAGE:-docker.io/zmkfirmware/zmk-build-arm:stable}"
 
-docker run -it --rm \
+if [[ -n $ZMK_PULL_DOCKER_IMAGE ]]; then
-	-v ${PWD}/.cache:/zofle \
+	docker pull "$ZMK_DOCKER_IMAGE"
-	-v ${PWD}/config:/zofle/config:ro \
+fi
-	-v ${PWD}/build:/build \
+
+mkdir -p "${PWD}/build"
+mkdir -p "${PWD}/.cache"
+podman run -it --rm \
+	-v "${PWD}/.cache:/zofle" \
+	-v "${PWD}/config:/zofle/config:ro" \
+	-v "${PWD}/build:/build" \
 	"$ZMK_DOCKER_IMAGE" sh -c '
 		set -x
 		set -e
 		cd /zofle
+		git config --global --add safe.directory /zofle/zmk
 		west init -l config || true # allowed to fail since it will fail if already initialized
 		west update
 		west zephyr-export

zofle/config/sofle.keymap

@@ -19,7 +19,7 @@
 #define L_C COMBO_LAYER_ID
 
 &mt {
-  retro-tap;
+  #retro-tap;
   label = "Mod Tap";
   #binding-cells = <2>;
   tapping-term-ms = <200>;
@@ -46,8 +46,8 @@
       bindings = <
         &kp GRAVE     &kp N1   &kp N2   &kp N3   &kp N4    &kp N5                        &kp N6  &kp N7    &kp N8    &kp N9    &kp N0   &kp BSPC
         &kp TAB       &kp Q    &kp W    &kp E    &kp R     &kp T                         &kp Y   &kp U     &kp I     &kp O     &kp P    &kp BSPC
-        &mt LCTRL ESC &kp A    &kp S    &kp D    &kp F     &kp G                         &kp H   &kp J     &kp K     &kp L     &kp SEMI &ht LCTRL SQT
+        &mt LCTRL ESC &kp A    &kp S    &kp D    &kp F     &kp G                         &kp H   &kp J     &kp K     &kp L     &kp SEMI &ht RCTRL SQT
-        &kp LSHFT     &kp Z    &kp X    &kp C    &kp V     &kp B   &kp C_MUTE   &kp K_PP &kp N   &kp M     &kp COMMA &kp DOT   &kp FSLH &kp RET
+        &kp LSHFT     &kp Z    &kp X    &kp C    &kp V     &kp B   &kp C_MUTE   &kp K_PP &kp N   &kp M     &kp COMMA &kp DOT   &kp FSLH &ht RSHFT RET
                                &kp LALT &kp LGUI &kp SPACE &mo L_L &kp LSHFT    &kp RET  &mo L_R &kp SPACE &kp RALT  &kp RSHFT
       >;
 
@@ -63,7 +63,7 @@
                            &trans   &trans   &trans    &trans  &trans       &trans   &trans  &trans    &trans    &trans
       >;
 
-      sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN &inc_dec_kp PG_DN PG_UP >;
+      sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN &inc_dec_kp RIGHT LEFT >;
     };
 
     lower_layer {
@@ -75,7 +75,7 @@
                     &trans    &mo L_C     &trans   &trans    &trans   &trans &mo L_C   &kp RET   &trans          &trans
       >;
 
-      sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN &inc_dec_kp LEFT RIGHT>;
+      sensor-bindings = <&inc_dec_kp C_VOL_UP C_VOL_DN &inc_dec_kp RIGHT LEFT>;
     };
 
     raise_layer {
@@ -93,7 +93,7 @@
     combo_layer {
       bindings = <
 &bootloader       &tog 1           &trans       &ext_power EP_OFF &bt BT_CLR   &out OUT_TOG                 &trans     &trans       &ext_power EP_OFF &trans       &trans           &bootloader
-&reset            &trans           &trans       &trans            &trans       &out OUT_BLE                 &kp C_PREV &kp C_VOL_DN &kp K_PP          &kp C_VOL_UP &kp C_NEXT       &reset
+&sys_reset        &trans           &trans       &trans            &trans       &out OUT_BLE                 &kp C_PREV &kp C_VOL_DN &kp K_PP          &kp C_VOL_UP &kp C_NEXT       &sys_reset
 &ext_power EP_ON  &ext_power EP_ON &trans       &trans            &trans       &out OUT_USB                 &kp LEFT   &kp DOWN     &kp UP            &kp RIGHT    &ext_power EP_ON &ext_power EP_ON
 &trans            &bt BT_SEL 0     &bt BT_SEL 1 &bt BT_SEL 2      &bt BT_SEL 3 &bt BT_SEL 4 &trans   &trans &kp HOME   &kp PGDN     &kp PGUP          &kp END      &trans           &trans
                                    &trans       &trans            &trans       &trans       &trans   &trans &trans     &trans       &trans            &trans

zofle/flash.fish

@@ -11,7 +11,9 @@ set firmware_file $argv[1]
 mkdir -p /tmp/flashmnt
 while not test -L $flash_target
 	echo Waiting for mountable device $flash_target to become available to flash $firmware_file...
-	echo "  This usually means you need to plugin the board and reset it."
+	echo '    This usually means you need to plugin the board and reset it.'
+	echo '    This is done by plugging in the board and double-tapping the'
+	echo '    reset button with the nice!nano controllers this build uses.'
 	sleep 1
 end
 

zofle/makefile

@@ -1,3 +1,4 @@
+# TODO: targets and dependencies?
 .PHONY: build sleep
 build:
 	@bash build.bash
@@ -12,7 +13,10 @@ sleep:
 	echo "Sleeping for 2 seconds for disks to fully sync and unmount..."
 	@sleep 2
 
-clean:
+clean: pull
 	@sudo rm -r .cache build
 
-everything: build flash-left sleep flash-right
+pull:
+	@docker pull docker.io/zmkfirmware/zmk-build-arm:stable
+
+everything: pull build flash-left sleep flash-right

zofle/readme.md

@@ -6,7 +6,7 @@ My Sofle+nice!nano_v2 keyboard.
 
 ## Setup
 
-You will need `fish` and `docker`.
+You will need `fish` and `podman`.
 
 ## Build Firmware
 
@@ -17,12 +17,10 @@ You will need `fish` and `docker`.
 You can flash your left-half:
 
     make flash-left
-    # double-tap the reset button on the left half while plugged in
 
 And your right-half:
 
     make flash-right
-    # double-tap the reset button on the right half while plugged in
 
 ### Other Flash Methods