43 lines
1.3 KiB
Markdown
43 lines
1.3 KiB
Markdown
|
# Zofle
|
||
|
|
|
||
|
|
My Sofle+nice!nano_v2 keyboard.
|
||
|
|
|
||
|
|
## Setup
|
||
|
|
|
||
|
|
You will need `fish` and `docker`.
|
||
|
|
|
||
|
|
## Build Firmware
|
||
|
|
|
||
|
|
make build
|
||
|
|
|
||
|
|
## Flash Firmware
|
||
|
|
|
||
|
|
You can flash your left-half:
|
||
|
|
|
||
|
|
make flash-left
|
||
|
|
# double-tap the reset button on the left half while plugged in
|
||
|
|
|
||
|
|
And your right-half:
|
||
|
|
|
||
|
|
make flash-right
|
||
|
|
# double-tap the reset button on the right half while plugged in
|
||
|
|
|
||
|
|
### Other Flash Methods
|
||
|
|
|
||
|
|
If, for whatever reason, the flashing scripts do not work for you, here are the
|
||
|
|
steps to flashing the nice!nano MCUs manually:
|
||
|
|
|
||
|
|
1. Plug your nice!nano into your computer.
|
||
|
|
2. Press the reset button twice.
|
||
|
|
- This should case the blue LED to pulse slowly.
|
||
|
|
- If it pulses quickly, it is not plugged in.
|
||
|
|
- If you can't see the blue LED, you may have to contort your board to
|
||
|
|
look at the other side of the nice!nano's PCB.
|
||
|
|
3. The nice!nano should present itself to your OS as a flash drive. Mount it.
|
||
|
|
4. Copy the firmware file from `build/sofle_$SIDE_nice_nano.uf2` to the `CURRENT.UF2` on the mounted flash drive.
|
||
|
|
- Example for left-half: `cp build/sofle_left_nice_nano.uf2 /run/media/daniel/NICENANO/CURRENT.UF2`
|
||
|
|
- Example for right-half: `cp build/sofle_right_nice_nano.uf2 /run/media/daniel/NICENANO/CURRENT.UF2`
|
||
|
|
|
||
|
|
Your nice!nano will work for a bit and once the copying is done (it can take
|
||
|
|
2 to 20 seconds) it should boot into the new firmware.
|